Products

Cap Seal for petroleum

While using the "Client-Oriented" organization philosophy, a rigorous top quality command process, highly developed production devices and a potent R&D workforce, we normally provide high quality products, outstanding solutions and aggressive charges for Cap Seal for petroleum, Aluminum Foil Sealing Liner, One-Piece Induction Seal Liner, Induction Sealing Liner, Our goal is "blazing new ground, Passing Value", in the potential, we sincerely invite you to mature up with us and create a vivid foreseeable future jointly! Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, trust the first and management the advanced" for Cap Seal for petroleum, Our technical expertise, customer-friendly service, and specialized products make us/company name the first choice of customers and vendors. We are looking for your inquiry. Let's set up the cooperation right now!


  • One-piece Heat Induction Seal Liner with Inner PE Foam

    One-piece Heat Induction Seal Liner with Inner PE Foam

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Glue Seal

    Glue Seal

    The glue seal can be made into a single piece or two pieces according to customer needs. There is a layer hot melt adhesive coated on the sealing layer of the aluminum seal liner. After heating process by the induction seal machine or electric iron, the adhesive layer will be sealed on the lip of the container. This type liner is available to all kinds of material container., especially for the glass container, but the effects is not better than the induction seal liner.

  • Foam Liner

    Foam Liner

    Foam liner is a general purpose liner, made of compressible polyethylene foam. These do not create a seal, and is often used for leak prevention.

    Form Liner is one-piece liner, the material is EVA, EPE etc.

    On its own elastic send contractility and container port.

    Suitable for all kinds of container sealing, can use repeatedly, but the seal effect is general.

    Can be used after and aluminum-plastic composite membrane composite and the sealing effect is better.

    The main features for the clean, dust, do not absorb water vapor, not because of humidity or temperature to change its stability.

  • One-piece Heat Induction Seal Liner with Backing

    One-piece Heat Induction Seal Liner with Backing

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Two-piece Heat Induction Seal Liner with Paper Layer

    Two-piece Heat Induction Seal Liner with Paper Layer

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.

  • Easy Peel Aluminum Foil Induction Seal Liner

    Easy Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Lift ‘N’ Peel

    Lift ‘N’ Peel

    Lift ‘N’ Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container. This induction seal liner is easy to open with lift ‘N’ peel function.

  • Pressure Sensitive Seal Liner

    Pressure Sensitive Seal Liner

    The liner is composed of foam material coated with high quality pressure sensitive. This liner is also called one-piece liner. It provides tight seal with the adhesive to the container by the pressure only. Without any seal and heating devices. like the hot melt adhesive induction seal liner, is available to all kinds of containers: plastic, glass and metal containers. But it’s not designed for barrier properties, the effects is less than the former, so is recommended to use for solid an powdered goods, such as food, cosmetic and health care products.

  • Two-Piece Heat Induction Seal Liner With “A Structure”

    Two-Piece Heat Induction Seal Liner With “A Structure”

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.

  • One-piece Heat Induction Seal Liner with White PE Film

    One-piece Heat Induction Seal Liner with White PE Film

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.