Products

Closure Seal Induction Liners

We always get the job done to be a tangible staff to ensure that we can easily offer you the best high-quality and the greatest value for Closure Seal Induction Liners, Oil Cap flat ring, Glass Foil Liner, Heat Seal Liner, Our concept would be to assist presenting the confidence of each prospective buyers while using the offering of our most honest service, as well as right merchandise. The organization keeps on the procedure concept "scientific management, high quality and efficiency primacy, purchaser supreme for Closure Seal Induction Liners, Corporate goal: Customers' satisfaction is our goal, and sincerely hope to establish long-terms stable cooperative relations with customers to jointly develop the market. Building brilliant tomorrow together!Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us.


  • One-piece Heat Induction Seal Liner with Backing

    One-piece Heat Induction Seal Liner with Backing

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Foam Liner

    Foam Liner

    Foam liner is a general purpose liner, made of compressible polyethylene foam. These do not create a seal, and is often used for leak prevention.

    Form Liner is one-piece liner, the material is EVA, EPE etc.

    On its own elastic send contractility and container port.

    Suitable for all kinds of container sealing, can use repeatedly, but the seal effect is general.

    Can be used after and aluminum-plastic composite membrane composite and the sealing effect is better.

    The main features for the clean, dust, do not absorb water vapor, not because of humidity or temperature to change its stability.

  • Two-Piece Heat Induction Seal Liner With “A Structure”

    Two-Piece Heat Induction Seal Liner With “A Structure”

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.

  • Easy Peel Aluminum Foil Induction Seal Liner

    Easy Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Pressure Sensitive Seal Liner

    Pressure Sensitive Seal Liner

    The liner is composed of foam material coated with high quality pressure sensitive. This liner is also called one-piece liner. It provides tight seal with the adhesive to the container by the pressure only. Without any seal and heating devices. like the hot melt adhesive induction seal liner, is available to all kinds of containers: plastic, glass and metal containers. But it’s not designed for barrier properties, the effects is less than the former, so is recommended to use for solid an powdered goods, such as food, cosmetic and health care products.

  • 3-Ply Foam Liner

    3-Ply Foam Liner

    3-ply foam liners are made of three layers: a thin foam core is sandwiched between two layers of LDPE film. 3-ply foam liner tends to be used interchangeably with foam liner. However, it actually performs better than a regular foam liner. Like the foam liner, this also does not create an airtight seal.

    It is taste and odor resistant, and has a low moisture transmission rate, meaning it prevents moisture from entering the bottle and affecting product.

  • Two-piece Heat Induction Seal Liner with Paper Layer

    Two-piece Heat Induction Seal Liner with Paper Layer

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.

  • Glue Seal

    Glue Seal

    The glue seal can be made into a single piece or two pieces according to customer needs. There is a layer hot melt adhesive coated on the sealing layer of the aluminum seal liner. After heating process by the induction seal machine or electric iron, the adhesive layer will be sealed on the lip of the container. This type liner is available to all kinds of material container., especially for the glass container, but the effects is not better than the induction seal liner.

  • Lift ‘N’ Peel

    Lift ‘N’ Peel

    Lift ‘N’ Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container. This induction seal liner is easy to open with lift ‘N’ peel function.

  • One-piece Heat Induction Seal Liner with Inner PE Foam

    One-piece Heat Induction Seal Liner with Inner PE Foam

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.