Products

Foil Cap Liner

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and growth, we're going to build a prosperous future together with your esteemed firm for Foil Cap Liner, Induction Wad, Epe Foam Liner, Eps Foam, We sincerely welcome all guests to setup small business associations with us on the basis of mutual positive aspects. You should get in touch with us now. You'll get our professional reply within 8 hours. We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most competitive prices. So Profi Tools offer you best value of money and we are ready to develop together with Foil Cap Liner, Customer's satisfaction is always our quest, creating value for customers is always our duty, a long term mutual-beneficial business relationship is what we are doing for. We are an absolutely reliable partner for you in China. Of course, other services, like consulting, can be offered too.


  • One-piece Heat Induction Seal Liner with White PE Film

    One-piece Heat Induction Seal Liner with White PE Film

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • One-piece Heat Induction Seal Liner with Inner PE Foam

    One-piece Heat Induction Seal Liner with Inner PE Foam

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • One-piece Heat Induction Seal Liner with Backing

    One-piece Heat Induction Seal Liner with Backing

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Lift ‘N’ Peel

    Lift ‘N’ Peel

    Lift ‘N’ Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container. This induction seal liner is easy to open with lift ‘N’ peel function.

  • Foam Liner

    Foam Liner

    Foam liner is a general purpose liner, made of compressible polyethylene foam. These do not create a seal, and is often used for leak prevention.

    Form Liner is one-piece liner, the material is EVA, EPE etc.

    On its own elastic send contractility and container port.

    Suitable for all kinds of container sealing, can use repeatedly, but the seal effect is general.

    Can be used after and aluminum-plastic composite membrane composite and the sealing effect is better.

    The main features for the clean, dust, do not absorb water vapor, not because of humidity or temperature to change its stability.

  • Easy Peel Aluminum Foil Induction Seal Liner

    Easy Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Glue Seal

    Glue Seal

    The glue seal can be made into a single piece or two pieces according to customer needs. There is a layer hot melt adhesive coated on the sealing layer of the aluminum seal liner. After heating process by the induction seal machine or electric iron, the adhesive layer will be sealed on the lip of the container. This type liner is available to all kinds of material container., especially for the glass container, but the effects is not better than the induction seal liner.

  • Pressure Sensitive Seal Liner

    Pressure Sensitive Seal Liner

    The liner is composed of foam material coated with high quality pressure sensitive. This liner is also called one-piece liner. It provides tight seal with the adhesive to the container by the pressure only. Without any seal and heating devices. like the hot melt adhesive induction seal liner, is available to all kinds of containers: plastic, glass and metal containers. But it’s not designed for barrier properties, the effects is less than the former, so is recommended to use for solid an powdered goods, such as food, cosmetic and health care products.

  • Vented Seal Liner

    Vented Seal Liner

    The vented seal is made of a breathable film and a Heat induction seal (HIS) through ultrasonic or hot melt welding, which fully achieves the effect of “breathable and no leakage”. The vented seal has a simple design, excellent air permeability and excellent resistance to surfactants. This product is developed to prevent the filling container (bottle) from being shaken or placed at different temperatures to produce gas after filling a certain liquid, thereby causing the container to deform or the bottle cap to crack.

    Vented liner is best airflow performance in the industry, multiple venting options fulfill various performance needs. Offered in one piece foam or two piece wax bonded to pulp.

  • Two-piece Heat Induction Seal Liner with Paper Layer

    Two-piece Heat Induction Seal Liner with Paper Layer

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.