Products

Induction Seal Liners

Bear "Customer 1st, Good quality first" in mind, we work closely with our prospects and supply them with efficient and professional services for Induction Seal Liners, Bottle Sealing Foil, Aluminum Foil Induction Sealer, Oil Cap flat ring, We also ensure that your selection will be crafted with the highest quality and reliability. Please feel free to contact us for further information. Well-run products, skilled income group, and better after-sales products and services; We have been also a unified massive family, all people stick with the business price "unification, dedication, tolerance" for Induction Seal Liners, Be sure to feel cost-free to send us your specs and we are going to respond for you asap. We have got a experienced engineering team to serve for the every single comprehensive needs. Free samples may be sent for yourself personally to know far more facts. So that you can meet your desires, please actually feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.


  • Foam Liner

    Foam Liner

    Foam liner is a general purpose liner, made of compressible polyethylene foam. These do not create a seal, and is often used for leak prevention.

    Form Liner is one-piece liner, the material is EVA, EPE etc.

    On its own elastic send contractility and container port.

    Suitable for all kinds of container sealing, can use repeatedly, but the seal effect is general.

    Can be used after and aluminum-plastic composite membrane composite and the sealing effect is better.

    The main features for the clean, dust, do not absorb water vapor, not because of humidity or temperature to change its stability.

  • One-piece Heat Induction Seal Liner with White PE Film

    One-piece Heat Induction Seal Liner with White PE Film

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Lift ‘N’ Peel

    Lift ‘N’ Peel

    Lift ‘N’ Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container. This induction seal liner is easy to open with lift ‘N’ peel function.

  • 3-Ply Foam Liner

    3-Ply Foam Liner

    3-ply foam liners are made of three layers: a thin foam core is sandwiched between two layers of LDPE film. 3-ply foam liner tends to be used interchangeably with foam liner. However, it actually performs better than a regular foam liner. Like the foam liner, this also does not create an airtight seal.

    It is taste and odor resistant, and has a low moisture transmission rate, meaning it prevents moisture from entering the bottle and affecting product.

  • Easy Peel Aluminum Foil Induction Seal Liner

    Easy Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • One-piece Heat Induction Seal Liner with Inner PE Foam

    One-piece Heat Induction Seal Liner with Inner PE Foam

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Pressure Sensitive Seal Liner

    Pressure Sensitive Seal Liner

    The liner is composed of foam material coated with high quality pressure sensitive. This liner is also called one-piece liner. It provides tight seal with the adhesive to the container by the pressure only. Without any seal and heating devices. like the hot melt adhesive induction seal liner, is available to all kinds of containers: plastic, glass and metal containers. But it’s not designed for barrier properties, the effects is less than the former, so is recommended to use for solid an powdered goods, such as food, cosmetic and health care products.

  • Vented Seal Liner

    Vented Seal Liner

    The vented seal is made of a breathable film and a Heat induction seal (HIS) through ultrasonic or hot melt welding, which fully achieves the effect of “breathable and no leakage”. The vented seal has a simple design, excellent air permeability and excellent resistance to surfactants. This product is developed to prevent the filling container (bottle) from being shaken or placed at different temperatures to produce gas after filling a certain liquid, thereby causing the container to deform or the bottle cap to crack.

    Vented liner is best airflow performance in the industry, multiple venting options fulfill various performance needs. Offered in one piece foam or two piece wax bonded to pulp.

  • One-piece Heat Induction Seal Liner with Backing

    One-piece Heat Induction Seal Liner with Backing

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Two-Piece Heat Induction Seal Liner With “A Structure”

    Two-Piece Heat Induction Seal Liner With “A Structure”

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.