Products

Bottle Cap Seal

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Bottle Cap Seal, Foam Seal, Oil Cap flat ring, Epe Foam Liner, We're going to make higher efforts that can help domestic and international potential buyers, and produce the mutual advantage and win-win partnership between us. we're eagerly waiting for your sincerely cooperation. Usually customer-oriented, and it's our ultimate focus on to be not only by far the most reliable, trustable and honest provider, but also the partner for our customers for Bottle Cap Seal, We also have the strong ability of integration to supply our best service, and plan to build the warehouse in the different countries around the world, that will be more conveniently to service our customers.


  • Two-piece Heat Induction Seal Liner with Paper Layer

    Two-piece Heat Induction Seal Liner with Paper Layer

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.

  • Pressure Sensitive Seal Liner

    Pressure Sensitive Seal Liner

    The liner is composed of foam material coated with high quality pressure sensitive. This liner is also called one-piece liner. It provides tight seal with the adhesive to the container by the pressure only. Without any seal and heating devices. like the hot melt adhesive induction seal liner, is available to all kinds of containers: plastic, glass and metal containers. But it’s not designed for barrier properties, the effects is less than the former, so is recommended to use for solid an powdered goods, such as food, cosmetic and health care products.

  • 3-Ply Foam Liner

    3-Ply Foam Liner

    3-ply foam liners are made of three layers: a thin foam core is sandwiched between two layers of LDPE film. 3-ply foam liner tends to be used interchangeably with foam liner. However, it actually performs better than a regular foam liner. Like the foam liner, this also does not create an airtight seal.

    It is taste and odor resistant, and has a low moisture transmission rate, meaning it prevents moisture from entering the bottle and affecting product.

  • One-piece Heat Induction Seal Liner with Inner PE Foam

    One-piece Heat Induction Seal Liner with Inner PE Foam

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Glue Seal

    Glue Seal

    The glue seal can be made into a single piece or two pieces according to customer needs. There is a layer hot melt adhesive coated on the sealing layer of the aluminum seal liner. After heating process by the induction seal machine or electric iron, the adhesive layer will be sealed on the lip of the container. This type liner is available to all kinds of material container., especially for the glass container, but the effects is not better than the induction seal liner.

  • Easy Peel Aluminum Foil Induction Seal Liner

    Easy Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.

  • Two-Piece Heat Induction Seal Liner With “A Structure”

    Two-Piece Heat Induction Seal Liner With “A Structure”

    This liner is made up of aluminum foil layer and backup layer. It needs the induction seal machine. After induction machine provides a heat-seal laminate hermetically sealed to the lip of a container, the aluminum layer is sealed on the lip of the container and the secondary layer (cardboard of form) is left in the cap. The secondary liner as the reseal liner is left in the cap after heating process.

  • Vented Seal Liner

    Vented Seal Liner

    The vented seal is made of a breathable film and a Heat induction seal (HIS) through ultrasonic or hot melt welding, which fully achieves the effect of “breathable and no leakage”. The vented seal has a simple design, excellent air permeability and excellent resistance to surfactants. This product is developed to prevent the filling container (bottle) from being shaken or placed at different temperatures to produce gas after filling a certain liquid, thereby causing the container to deform or the bottle cap to crack.

    Vented liner is best airflow performance in the industry, multiple venting options fulfill various performance needs. Offered in one piece foam or two piece wax bonded to pulp.

  • Lift ‘N’ Peel

    Lift ‘N’ Peel

    Lift ‘N’ Peel Aluminum Foil Induction Seal Liner

    This is one-piece induction seal liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container. This induction seal liner is easy to open with lift ‘N’ peel function.

  • One-piece Heat Induction Seal Liner with White PE Film

    One-piece Heat Induction Seal Liner with White PE Film

    This is one-piece induction seal Liner, no backup or secondary layer, it can be sealed on the container by induction seal machine or electric iron directly. It can provide tight seal on plastic or glass containers can be removed with the whole piece, and there is no any residue on the lip of the container.