EN | FR | ES | عربي

Product family 06 · Vented liners and caps

Vented Liners and Caps, Allowing Gas to Escape While Retaining Liquid

Breathable-membrane liners and press-fit vents that prevent agrochemical and fertiliser bottles from bulging or bursting, while keeping liquid sealed.

Free samples: you cover only the courier cost · Reply within 48 hours

Overview

Pressure relief for containers that build gas

Some contents release gas as they sit, especially in heat or transit. Agrochemical and fertiliser bottles bulge, and at worst burst. Vented liners solve this with a breathable membrane that lets gas out while the liquid stays sealed inside.

The membrane is chemically resistant, holding up against pesticides, fertilisers and solvent-based liquids. Choose a membrane liner that seals onto the bottle, or a ready-to-use press-fit vent cap.

Vented liner with breathable membrane
VENTED LINERS & CAPS
Breathable-membrane liners and press-fit vents for pressure relief

How it is built

A layered structure, drawn to spec

Layered structure of a vented seal liner with one-way breathable membrane

A vented liner adds a breathable membrane to the foil build. Gases escape as pressure builds while the liquid stays sealed inside, protecting containers from bulging or bursting.

Why this family

What a vented closure protects against

Vents gas, holds liquid

A breathable membrane that equalises pressure without leaking.

Stops bulging and bursting

Protects containers that build gas in transit or heat.

Chemical resistance

Proven against pesticides, fertilisers and solvent-based liquids.

Liner and press-fit caps

Both membrane liners and ready-to-use vent plugs.

Variants

Pick the vent by the container

Two formats cover the range: a breathable-membrane liner that seals the bottle mouth, and a ready-to-use press-fit vent cap for simple insertion.

Variants in this family · final structure confirmed in your proposal
VariantWhat it doesTypical use
Vented liner A breathable-membrane liner that seals the bottle while venting gas Agrochemical bottles
Press-fit vent cap A ready-to-use vent plug pressed into the container Liquid fertiliser packs
Ø 9–182 mm
Liners die-cut to your bottle mouth, plus vent caps
Gas venting
A breathable membrane that vents while retaining liquid
Resistant
Holds up to pesticides, fertilisers and solvents
Two formats
Membrane liners and press-fit vent caps

Applications

Where this family is used

AgrochemicalsFertilisers

Send us your container and receive a venting proposal.

Tell us what you fill, the container type and the gas-release problem. We reply within 48 hours, and sample vents are free.